Ultraviolet disinfection table lamp J-01 38W UV AIR STERILIZER LAMP from HUBEI JUCRO ElECTRIC
Applications and locations where to implement
l Treatment of air in waste management facilities.
l Removal of "bad air" in home and office.
l Food storage facilities (cheese, wine, vegetables, fruits, meats, etc).
l Clinical environments such as clinics, hospitals, operating rooms，dental surgeries, schools, holding facilities.
l Laboratories and testing facilities that require a clinically clean environment.
l Food processing plantations.
l Decontaminate of storage facilities.
Caution
Please read the instruCTion manual carefully and keep the manual for your future reference.
l When the package is opened, kindly ensure that all required materials are intact and in good working condition.
l The unit must be unplugged from the socket before and during cleaning.
l Do not use in flammable and high temperature areas.
l Avoid inserting the power cord with force.
l Please remove the plug from the socket if not in use for a long period.
l Do not repair the unit yourself.
l Do not extend the length of the wire yourself.
l Please use the rated voltage power supply.
l Please ensure that the machine is placed in a properly ventilated room.
Disposal / Recycling:
UVC lamps contain mercury (a hazardous waste). Do not discard these lamps in the trash. Disposal must be made in accordance with local, state and federal regulations. Contact the local hazardous waste management authority for proper recycling / disposal instructions.
Area and duration of disinfection
Space Disinfection: Please place the sterilizer in the center of the room and set the sterilizing time according to the table below.
ROOM AREA | POWER OF STERILIZING LAMP | RECOMMENDED DISINFECTION TIME |
About 10 square meters | 38W | 15min |
About 10 square meters | 60W | 15min |
About 20 square meters | 38W | 30min |
About 20 square meters | 60W | 15min |
About 40 square meters | 38W | 60min |
About 40 square meters | 60W | 30min |
About 60 square meters | 60W | 60min |
Parameters
Light wave | UV-C primarily in the 253.7nm wavelength |
Rated Voltage | 220V~230V |
Rated frequnecy | 50Hz |
UV intensity | 150 μW/cm²(1 meter distance) |
Bulb lifespan | 8000 operational hours |
Ballast lifespan | 20000 operational hours |
Bulb length | 410mm/530mm |
UV Lamp Power | 38W/60W |
Timing mode | Electronic timing |
Remote control mode | Wireless through-the-wall remote |
Light wave | UV-C primarily in the 253.7nm wavelength |
Rated Voltage | 110V~120V |
Rated frequnecy | 60Hz |
UV intensity | 150 μW/cm²(1 meter distance) |
Bulb lifespan | 8000 operational hours |
Ballast lifespan | 20000 operational hours |
Bulb length | 410mm/530mm |
UV Lamp Power | 38W/60W |
Timing mode | Electronic timing |
Remote control mode | Wireless through-the-wall remote |
Benefits
l Effective in the prevention of Tuberculosis, MRSA, H1N1 and other airborne cross contamination.
l Eliminates 99.9% of bacteria, yeast, mold and fungus problems found in hospitals, schools, food manufacturing plants and offices.
l Recommended by medical experts.
l Kills harmful bacteria in closed premises.
l Reduces asthmatic effects.
l Eliminates odours and neutralizes the air.
How to replace the UV-C bulb
l Disassemble the 3 screws at the side of the UV-C bulb.
l Take off the bulb protection cover.
l Replace with a new bulb.
l Assemble the bulb protection cover with the 3 screws.
❉ Avoid breaking the bulb after removal
How to operate the unit
l Connect the power cord to the socket.
l Press the ON/OFF button to switch on the unit. The power LED and the 3 timer LEDs will flicker.
l Press the Timer button to select the time (15, 30 or 60minutes).
l Leave the room. The UV-C lamp will start working automatically after 10 seconds.
l Can also be operated with the remote control the unit.
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
INQUIRY
Add Successfully
